Tag : blog hop

3 posts

Welcome, to the November Creative Team Blog Hop.

Once you finish my blog click on the names below to hop along:

Kazan Clark

Lezlye Lauterbach

Carrie Rhoades

Christine Chan

Jill Hilliard

Marty McGee (you are here)

The blog hop theme for November is Christmas and I wanted to bring to life a 3D project featuring the Gingerbread Boy Tag Set.

Click on the banner below to order your Gingerbread Boy Tag Die Set:

This little guy evolved from a Pumpkin Bread Gingerbread Boy to a Santa Gingerbread Man. In fact, there are two Santas bringing you a special treat for Christmas.

To begin, cut one each of the gingerbread boy die in the following cardstock colors: Peaches and Cream, Candy Apple, Whip Cream and Black Licorice.

To create a Santa, take your die-cuts and proceed as follows. On the Black Licorice die-cut, cut off the arms and legs for Santa’s gloves and boots. On the Whip Cream die-cut, cut rectangular shaped pieces off each arm (near the shoulder),  off each leg (near body), at neck into the body portion and the middle part of the face. For Santa’s suit cut off the arms, feet and head from the Candy Apple die-cut. You will need to cut off the top portion of the Candy Apple head for the hat and save back one of the hands for the tip of the cap (the top portion for the cap is not pictured).

Glue the arms and legs onto the Peaches and Cream gingerbread Santa. Add the facial features onto Santa’s face. These pieces are cut from Black Licorice, Watermelon Fusion and Whip Cream.

Adhere the red suit and cap to Santa’s body.

To finish off Santa’s outfit, die-cut a curvy Whip Cream strip, three large Black Licorice circles and one large Whip Cream circle. Apply the curvy strip down the front of Santa’s suit, add buttons and puff to end of Santa’s cap. Go ahead and add the cuffs, rim of cap and neck trim to body.

Set aside the two Santas. Cut two strips of Candy Apple cardstock one at 5 3/8″ x 1 1/2″ and the other 5″ x 2 1/2″. Score both pieces at 1 3/4″ measure in from each end. On the 5″ x 2 1/2″ strip, score down each long side at 1/4″, cut out the scored tabs on the middle portion (between the two 1 3/4″ score lines).   Place the 5 3/8″ x  1 1/2″ strip crosswise onto the 5″ x 2 1/2″ strip.  Adhere the tabbed edges to the inside of the crosswise strip.

 

Adhere a Santa to each narrow end of the box, where the middle of the Santa hides the box.

The last step is to Place candy or small cookies into a cello bag and tie off with a ribbon. Place treat into holder.

How cute is this for a Christmas treat.

 

Supplies:

Gingerbread Boy Tag Die Set
Cardstock – Peaches and Cream, Candy Apple, Whip Cream, Black Licorice, Watermelon Fusion
Trimmer
Cello Bag
Twine
Journey Glue
White Liner Tape
Precision Shears

 

 

 

It is time for Fun Stampers Journey Creative Team Blog Hop. The perfect theme for this blog hop is Fall! I know you will be inspired by all the creativity. Remember to subscribe to our blogs. This way you will be notified each month not only with our regular posts but with a colorful line up of uniquely Fun Stampers Journey projects brought to life by the FSJ Creative Team.

I know you will be amazed and inspired by the talent of these creative paper designers. Our team’s blog post links are below. If for some reason you hop off the trail, go to Fun Stampers Journey Blog and pick up where you left off.

Kazan Clark 

Lezlye Lauterbach 

Carrie Rhoades 

Christine Chan 

Jill Hilliard 

Jenny Watson 

Marty McGee (you are here!)

Alissa Hall

 

When you live in Georgia and have 90 degree days in September, things just don’t seem right. You know what I mean? I’ve been asking myself, where is Fall? I have been asking that question because I’m really just tired of the heat and I want to see those lovely leaves change into orange, yellow and red and feel the cool crispness of a fall breeze.

Well, the cooler weather is finally here and that means the leaves will be changing very soon. I must say, “So glad you could make it Fall!” To celebrate Fall’s arrival, I have created a set of cards inspired by those very same colors I previously mentioned. Come on, let’s give a cheer for Orange, Yellow and Red!

Both of the cards used the same beginning processes, which made the completion of these projects quick and easy. I used the dies from the Zen Leaves set and cut out two of each leaf except for one. It was so lonely, I decided to feature it on the treat box. To complete the first step, I pulled out the Gel Press, of course, Rich Coral and Lemon Drop Liquid Colors and the Media Mister.

I took the Rich Coral and Lemon Drop Liquid Colors and ran an alternating line of each color across the Gel Press. I spritzed the colors with the Media Mister and held the Gel Press up to allow the colors to flow down. I gave it another mist of water and then placed my paper on top of the mix.

The first pull is at the top picture below. The second step required a little more Liquid Color spritzed with water. I took the leaves and dabbed them into the mix.

Now, here’s where I began experimenting. Thank goodness, it came out just fine (big sigh of relief). Anyway, I inked both inside panels with Rich Coral. I place the liquid color panel color side down onto the inked section without the logo; I took the leaves and placed them on the backside of the inked panel. I ran this through my Platinum die cutting machine. Since the panel was not fully dried, the leaves pressed into the cardstock and I had to really search for an edge to pull them off. Another bullet dodged!!

TIP: Let the inked piece of paper dry completely. I had another mishap due to my impatience on the treat box.

Such a deep, rich embossed mat. It just warms my soul. Note: The mat is de-bossed even though it looks like the embossed side.

The first card has a base of Rich Coral and a Lemon Drop mat. The embossed mat is cut to allow a 1/8″ border allowing a hint of yellow. This embossed mat is broken up with a Tangerine Fusion strip of cardstock accented with a 1/4″ strip of corrugated cardstock along the bottom portion. The sentiment on the Rich Coral circle was stamped in Whip Cream and embossed with white embossing powder.

It was adhered with foam squares and accented it with a maple leaf from Golden Leaves Bloom Benefit. I inked over the top of the natural maple leaf with Oatmeal Cookie ink and edged it in Rich Coral ink.

Two golden accents from All The Things Bloom Benefit add a little sparkle to the card.

The second card has a base of Whip Cream and two mats. The first mat is Rich Coral. The second mat is Lemon Drop cardstock die cut using the Rectangle dies and piercing piece.

Here is a close up picture of the inked and embossed maple leaf.

The sentiment was stamped using Black Licorice from the Humble and Kind stamp set. This card is accented with yellow Rainbow Drops and one of the inked and embossed maple leaves tied with a double bow Natural Twine. The Lemon Drop mat and the maple leaf are adhered with foam squares.

The treat box was created using Rich Coral as the base. A box to hold the candy was cut from Lemon Drop cardstock with an inked and embossed band glued around the middle of the box. An accent strip of Lemon Drop and Tangerine Fusion are adhered across the front of the Rich Coral base. An inked and embossed leaf along with a dark brown male leaf painted with Sparkle Silk are adhered to the front and tied with a double bow. The treat box holds some yellow, orange and white Candy Corn, yum! The directions for the box are below the picture.


Step 1 – 4″ x 6″ Rich Coral cardstock for the base.
Step 2 – Score the long side at 1″, 3″ and 5″.
Step 3 – 4 1/2″ x 2″ Lemon Drop cardstock for the treat holder.
Step 4 – Score long side at 1/2″, 2″, 2 1/2″ and 4″.
Step 5 – Die cut the top of the box (optional).

TIP: When you die cut the edge using an edgelit type die, make sure to place your top cutting plate where it is not all the way over the die.

Take the Rich Coral base and fold it in half. Place the folded side against the edge of your trimmer.

Step 1 – Measure in 1/2″ and cut from the fold to the 1″ mark.
Step 2 – Move the cardstock to the 2″ mark and cut from the fold to the 1″ mark.
Step 3 – Open the folded cardstock and the tented piece you just created will become the window flaps as shown below.
Step 4 – Take your shears and from the smaller tented fold, cut 1/8″ on each side of the fold. This will create a window with flaps. The “window flaps” will hold the treat box in place.
Step 5 – Place white liner tape as indicated below.

Adhere the base sides together. This will create a long, narrow tent. Then, decorate the treat box as you would like. Place it into the opening while holding the flaps back with the fingers of your opposite hand. Once it is in place, press the flaps onto the box. Embellish the front of the box as you like.

I hope this set of paper projects has and will inspire you to create your own Fall themed cards and giftables. Let me know in the comments what is your favorite project. Make sure to post your inspired creations to Instagram and Facebook, tag me so I can see your paper brought to life.

Product List

Hi there! So glad you are hopping along with the FSJ Creative Team on a wonderful journey of amazing projects. Make sure to subscribe to our blogs. This way you will be notified each month not only with our regular posts but with a colorful line up of uniquely Fun Stampers Journey projects brought to life by the FSJ Creative Team. I hope you enjoy the fancy fold cards I created for this hop. Let the team know what inspires you to craft by posting comments.

I know you will be amazed and inspired by the talent of these creative paper crafters. Our team’s blog post links are below. If for some reason you hop off the trail, go to Fun Stampers Journey Blog and pick up where you left off.

Kazan Clark 

Lezlye Lauterbach 

Carrie Rhoades 

Christine Chan 

Jill Hilliard 

Jenny Watson 

Marty McGee (you are here!)

Alissa Hall

For this hop Strange Beauty is the featured stamp set, because I love insects. Yes, even spiders; although, I had to work on that one. I ordered this set a while ago and it sat unused and collecting dust because other sets kept calling my name, ya know what I mean. So, when the Creative Team was tasked to come up with some unique projects featuring each team member’s creative style, I immediately thought of this stamp set. I think all the “bugs” are just too cute.

The decision to create three projects featuring fancy fold cards was made from a poll I created giving FSJ coaches three choices as to what they would like to see. Fancy Fold cards won! And, here they are:

 

My vision was to create a night sky; so I pulled out one of my most favorite products, our Gel Press.  I created two background pulls (note: I did not use the brayer as shown in the picture below). Check out the pictures for the steps:

First pull:

Second pull:    

The first fold card is called a. . . .

Spring Card

5 1/4″ x 10 1/2″ piece of cardstock or printed paper
Scoring Tool (I used our trimmer)
Bone Folder
Pencil
Ruler
Scissors

Step 1: Fold paper in half to create a
5 1/4″ square.
Step 2: Open the paper and fold the left side edge to the center.
Step 3: Grab the upper right hand corner, pull it down and over until the edge of the paper is aligned with the fold made in step 2. Open the paper and repeat with the lower right hand corner (you may need to turn the paper around as a preference).
Step 4: Open the paper. Mark the center on the right hand edge. You can use a ruler and mark at 2 5/8″.
Step 5: From the center point to the scored edge cut a diagonal line on both sides. You will have a diamond shape.

Here are a few pictures for reference.

       

Once the Gel Press backgrounds were cut down to size (for all projects), I took the small dowel sponges and sponged Pretty Pansy and Black Licorice Fusion inks around the edges of the mats lightly. I added sprinkles of Whip Cream acrylic paint (watered down using the Media Mister) with a paint brush.

 

 

 

 

The spider web is stamped onto the Gel Press background mat in Whip Cream ink and embossed with White Embossing Powder. The spider was stamped using Black Licorice ink on a scrap of GelPress paper, spritzed with Electric Lime Splash and fussy cut. The sentiment was stamped in Whip Cream and embossed in white onto one of the corners cut off in step 5. It was sprinkled with diluted Whip Cream acrylic paint. The base portion of the card has the background mat with the picket fence cut out of Denim Days cardstock. The sentiment and the spider are popped up with foam squares. The final touch is Journey Glaze on the spider.

Just too stinkin’ cute!

TIP: I placed a glue dot (see pictures below). Top left picture is underneath the card before adhering everything together. Top right picture shows placement of the glue dot. Bottom picture shows where the dot sits on the base. Otherwise, the top portion would flop around and not stand up.

Here is the first of three projects – The Spring Fold Card featuring Strange Beauty

The second Fancy Fold card is a . . . .

Twist Gate Fold Card

7 1/2″ x 4 1/4″ piece of cardstock
2 pieces – 2 1/4″ x 3 7/8″ printed paper (I used only one piece of Gel Press Background paper for front panels)
TIP: on the 2 pieces above, make SURE your cut in the correct direction!!!!
Paper Trimmer
Bone Folder
For this card: paper clip,Designer Series stencil and Vintage Screen stencil

 Step 1: Place 7 1/2″ x 4 1/4″ cut cardstock in landscape position,
score at 2 1/2″ and 5″.
Step 2: Score the left panel diagonally from the upper left corner to the lower right corner. Repeat on the right panel, score diagonally from the upper left corner to the lower right corner.
Step 3: Fold score lines and crease with the bone folder.
Step 4: Cut printed paper or stamped paper diagonally for the front flaps from the upper left corner to the lower right corner.
Step 5: Cut printed paper or stamped paper diagonally for the back flaps from the upper right corner to the lower left corner.

Scoring diagram in pictures.

 

Front stamped image – Spritz Silver Shimmer onto a piece of Whip Cream Cardstock. Stamp the spider web on top of spritzed area using Black Licorice. Stamp the spider in Black Licorice onto Gel Press background scrap. Spritz a little Citrus Cooler onto the Spider and move around with a brush. Fussy cut the spider with detail shears. Adhere the spider to web with a foam square. Adhere the entire piece of cardstock to a Pretty Pansy mat. Sponge edges with Pretty Pansy and Black Licorice (remember to do this lightly). Add Journey Glaze to the spider and let it dry thoroughly. Add a blue Rainbow Drop to the spider’s back (Rainbow Drop shown on finished project).

Stamp the moth onto a scrap piece of Gel Press background paper. Layer the image onto three pieces of Pretty Pansy cardstock with Journey Craft Glue. Fussy cut. Dye a small piece of twine (antennas) with Turbo Teal silk. Glue the antennas to the back of the moth. Add the moth to a paper clip with foam squares and adhere to the moon. Apply Journey Glaze and let dry. Once the moth was dry, the edges were brushed with Turbo Teal silk to color the white edges.

Moon – cut a circle with our Circle dies (I created a small one for this project and a large one for the last project). Place the honeycomb stencil over the top of the circle and spritz with Silver Shimmer Splash. Apply Banana Cream Fusion ink with a sponge onto the moon.

Adhere spider on web stamped image to the front flaps TIP: only adhere to one flap (this way the card will open). For the back flaps, on my card, I stenciled Whip Cream ink onto the flaps using the Designer Series stencil (tree portion). Stamp sentiment onto inside of the card with Whip Cream and emboss with White Embossing Powder. Clip the moth to the back panel when the card is closed. It will help to keep the card from popping open.

And here it is:

 

The last Fancy Fold card is a . . . .

Cascade Fold Card

2 pieces 5 1/2″ x 8″ cardstock
Trimmer with score blade
Bone Folder
Pencil
Scissors

 

Step 1: Cut two pieces of 5 1/2″ x 8″ cardstock
Step 2: Score at 2″, 4″, 6″
Step 3: Pencil a mark 3″ up from bottom of card
Step 4: Cut both pieces from top left corner to pencil mark.
Step 5: See diagram. On one piece, cut down half way on the two outer score lines.
On the other piece, cut up half way on the two outer score lines. These will fit together.

 

 

 

Top picture is Step 4.

Left picture is Step 5.

Middle right are the pieces fitting together.

 

Bottom right is top view.

 

 

For the stamped images and background mats, I did the same techniques as shown in the first two card examples. Here are some  pics of various portions of the card. The background gel pressed paper on the back part of this card was created on Pretty Amethyst cardstock. To cut the front and back mats, I laid the panels onto the cascade fold portion marked lightly with a pencil and cut from those marks. I am definitely not someone that can measure and calculate my cuts!!!! I have to do it the hard way. What about you?

Here is the front and back of the Cascade Card.

 

Happy Crafting!

Product List

Spatula

$3.95
PAGE TOP
[dealsbar preview] Amazing Deals: !!toolbar-deal-title!! - !!toolbar-deal-merchant!!