Tag : Festive Fireplace

3 posts

This is the third and final card I entered on the SUO Challenge #136. See previous posts for Card 1 and Card 2.

 

 

This is one of three cards my stamping group will be making at the next make-n-take. It is based on an October challenge card (see below). The card I created in October was going to be one of the make-n-take cards, but I felt it was just too big and used up too much paper (a little worried I wouldn’t have enough similar paper for everyone). I decided; if I could make a double window, I, certainly, could make a six-paned window using the Hearth and Home thinlit, and I was successful. Just make sure you hold the plates as they come out the other side of the Big Shot, because they are quite the projectile. I could see someone busting a window to bits or knocking somone in the head. I wanted to keep the sleigh ride scene from the original card; so, I carefully pulled apart the original card, cut down the window scene, made a new window, adhered the dimensionals, added the glitter, and then . . . . What a nightmare! I made the shaker card based off of a shaker card tutorial on YouTube. Note to self: DO NOT place the window on the table, put the glitter on the window sheet and then place the card upside-down onto the window. Ha! It wasn’t exactly where I wanted it, and well, you know, when you try to reposition something with dimensionals you are asking for a mess; especially, if glitter is involved. Needless to say, the glitter got on the adhesive part of the dimensionals and made it not adhere well; therefore, when the card was shaken, glitter filtered out the sides of the window. We certianly, DON’T want glitter snow in our house. So, if you make this card, be advised, put the card on the table, put the glitter on the card, and then place the window where it needs to be and DON’T put too much glitter either. I’m sure you can’t see the miniscule amount of glitter in this card, but there is still some left. And, no, I didn’t want to remake the card. No, no, no! I was so frustrated by the time I got it right, I wanted to pull my hair out. My friend, Cheyenne was over here making her card with me, and she had a good laugh at my expense. (Note: make sure to rub the embossing buddy on the side of the window sheet that will make contact with the glitter to get rid of the static electricity.)

Anywhoo, we felt the card needed a little bling. We took the wreath framelit from the Festive Fireplace set and cut out wreaths in silver glimmer paper; then, cut them in half to make boughs. We added EVEN MORE bling by making lights for me and berries for Cheyenne on the boughs with Cherry Cobbler Dazzling Details. Real Red bows accent each bough. The bottom of the card looked so stark when we finished, I added joy in Cherry Cobbler cardstock from a retired SU! die (it’s really old).

And least I forget, the scene was made on Whisper White paper. I cut a circle out of copy paper and placed it on the background piece of cardstock. I sponged Coastal Cabana and Midnight Muse to create the night sky. The trees are from the SU! Wonderland set stamped in Midnight Muse. The sleigh thinlit was used for the sleigh rider and horse, cut in Whisper White cardstock. The background mats are Night of Navy and Whisper White, with the Whisper White embossed with the Stripes folder.

 

PCCCS165October Card

I think the revised version of the first card is much more to my liking. Either way, I really love this card.

Supplies: SU! retired Joy die. Note – it looks like Midnight Muse ink is not available, you can substitute Night of Navy (I listed it in the supplies).

 

Price: $110.00

Supply List

Built for Free Using: My Stampin Blog

If you read the first post for the first card I entered for the SUO Challenge #136, you will recognize this is the second entry based on the title of the blog. Sometimes, I come up with original ideas for my Christmas make-n-takes and sometimes I use Pinterest when my brain just can’t be creative anymore. This is an original card based on many cards on Pinterest. There’s not too many ways you can have a fireplace with stockings on a card other than changing the color scheme. This is my favorite card out of all seven designs offered at my make-n-takes.

 

Again, if you read my first post, you can see Cherry Cobbler is a central focus of this card as it is one of my favorite SU! colors. I think the Crumb Cake wainscoat really sets the card up to make the fireplace/mantel really pop. Since you can’t hold this card in your hand and see all of the 3D detail, I’ll give you the run down on what is popped and what is not. Everything has dimensionals on it except the background mats, the inside of the fireplace and the bow on the wreath. I used SU! Festive Fireplace Photopolymer Bundle to make this card. I stamped the fireplace with Staz-on black ink onto Cherry Cobbler and went back through with Whisper White and Pretty in Pink Craft inks to highlight the bricks (I used a q-tip). I cut the center of the fireplace out and placed a piece of Basic Gray in the opening (I think it makes the flames stand out). The flames are watercolored and the logs are stamped onto Chocolate Chip paper with some watercolor shading. The stockings were colored with Stampin’ Write Markers. The wreath was stamped using Mossy Meadow on Pear Pizzaz (I think – better double-check that before my class this Saturday or I used Garden Green ink) and has a splash of glitz using the Cherry Cobbler Dazzling Details from SU! The cat was stamped on Smoky Slate and sponged with Basic Gray. I love the cat, It makes me think of my friend Cindy Hilton and her love for ALL things cats. I did use the framelits to cut out the fireplace, mantle, and cat, but I didn’t like having a “huge” border; so, I either trimmed all the way down to the stamped line or trimmed very close to the stamped image. I can’t forget to mention the top background mat of Cherry Cobbler is stamped with the SU! retired background stamp Netting; it just gives the top part of the card a little depth. The bottom background of Crumb Cake was embossed using the SU! Stripes embossing folder.

Well, I think the above description of how I made the card sums it up. Love it!

Supplies: Note – to make a pink craft ink combine a drop of Cherry Cobbler reinker to a spoon size amount of Whisper White Craft re-inker and blend – adjust as necessary to get desired color.
SU! reitred background stamp Netting

 

Price: $110.00

Supply List

Built for Free Using: My Stampin Blog

This week’s Paper Craft Crew Card Challenge #165 is featuring the Hearth and Home Thinlit set. I love this set. It is so versatile and just makes the most darn cute cards you have ever seen. The card sketch is below:

PCCCS-161-204-002

I am having a December Christmas Card make-n-take. Each stamper will be making two each of three designs which are detailed and require extra time to complete. I had completed, I thought, one of the cards for this make-n-take, but once I saw this week’s card sketch, I changed a few things.

OLYMPUS DIGITAL CAMERA

This is a 6″ x 6″ shaker card. Yes, it will snow on the sleigh rider if you shake the card up and down. If you shake it sideways you have created a blizzard for the poor horse and rider to endure. This card had initially started off as a regular 5 1/2″ x 4 1/4″ card, but the double window took up the entire card and it just didn’t look “right.” I decided to make it a 6″ x 6″, which allows for a sentiment (card change from sketch).

I cut the sleigh rider out of SU! Whisper White and set it aside to create the evening background. I used a piece of Whisper White card stock for the background. I punched a circle to mask where the moon would be and then, I sponged on retired SU! Midnight Muse (Night of Navy would work) on the outer edges and Coastal Cabana in the center to add some light. I stamped the top portion of the trees from the new Wonderland stamp set in Midnight Muse (there are trees on both sides – the left side is obscured by glitter sticking to the acetate sheet I used for the window panes. I cut a double window out of Sahara Sand (first go-around was Very Vanilla, it really left the card looking washed out). I added a little glitter to the background piece after placing the sled and other hill onto it. Now, here is where things got a little dicey. I tried using the circle dimensionals.  Well, that tended to be a problem, because the dimensionals naturally curved, they are very thin, and don’t close the gaps between them very well. Needless to say, I had “glitter leak”. What a pain!!!! I tried squirting the new clear fine tip glue in the gaps, but I can say that did not work. I, eventually, went to Lowe’s and bout mounting tape, which I will cut in half and double. Oh, the joys of cardmaking snags.

Anywhoo, The top portion of the interior wall is SU! DSP from WAY BACK WHEN I can’t remember. It just look appropriate. Lost Lagoon is the bottom portion and it was embossed with SU! retired stripes embossing folder. I stamped the sentiment in Cherry Cobbler on Very Vanilla and ran it through the Big Shot with a banner die (oops! didn’t put that on the purchase list) and matted it with Cherry Cobbler card stock. I accented the sentiment with Gold Cording Trim. All of this is matted on Early Espresso.

Hope you enjoy!

Price: $110.00

Supply List

Built for Free Using: My Stampin Blog

PAGE TOP
[dealsbar preview] Amazing Deals: !!toolbar-deal-title!! - !!toolbar-deal-merchant!!